STATIONARY STEEL RAMPS

Rampmaster's stationary steel ramp allows the customer to convert one or more receiving doors to a" drive in style" door. The customer now has an option of bringing forklifts down to ground level or bringing vehicles into the warehouse. This style ramp also avoids the construction costs of digging, the placement of concrete foundations, and is worry free regarding drainage around the building.

Rampmaster's standard ramp is 30 feet long, this works with a normal dock height of 48 inches. The purpose of the ramp being 30 feet is so that it will have about a 12.9 % grade or be about 7.4 degrees this angle will make it easy for a forklift with a load to make the grade. The width of a ramp may vary but usually depends on application.

All ramps have a two inch thick steel serrated deck. The ramp comes fully painted. The lead on section and the apron at the top of the ramp are made from steel treadplate. All ramps are made to order and can include delivery and installation within the greater Toronto area.

A Rampmaster ramp with a normal door to the right.	Apron showing at top of ramp with 8.5 degree bend.
Pictured above - model SSR12-96-30 – 12,000lb capacity, 96 inches wide and 30 feet long.	Stationary steel ramps are not recommended for use with electric forklifts. Outdoor tires are recommended.